刀刃角与岩石节理倾角对盘型滚刀破岩效率的影响

为了研究节理倾角与刀刃角对滚刀破岩效率的影响,运用ABAQUS有限元分析软件,采用Druker-Prager弹塑性本构模型模拟岩石材料,使用不同刀刃角的滚刀对不同节理倾角的岩石进行滚切加工,并结合破岩比能理论研究破岩效率,以破岩比能最小为依据确定不同节理倾角下的最优刀刃角。研究结果表明:不论倾角如何,节理层处的岩石破碎效果优于其他地方的破碎效果;在节理倾角为0°和30°时,滚刀的破岩比能呈波动的趋势,而且最优刀刃角为60°;在节理倾角为60°时,最优刀刃角为45°~50°;在节理倾角为90°时,最优刀刃角为40°~45°;随着节理倾角的增加,最优刀刃角呈不断减小趋势。该研究结果可为不同地质条件下盾构施工时的刀具选型提供一定的理论依据。     

Crystal anisotropy-dependent shear angle variation in orthogonal cutting of single crystalline copper

Shear deformation that dominates elementary chip formation in metal cutting greatly relies on crystal anisotropy. In the present work we investigate the influence of crystallographic orientation on shear angle in ultra-precision orthogonal diamond cutting of single crystalline copper by joint crystal plasticity finite element simulations and in-situ experiments integrated in scanning electron microscope. In particular, the experimental cutting conditions including a straight cutting edge are the same with that used in the 2D finite element simulations. Both simulations and experiments demonstrate a well agreement in chip profile and shear angle, as well as their dependence on crystallography. A series of finite element simulations of orthogonal cutting along different cutting directions for a specific crystallographic orientation are further performed, and predicated values of shear angle are used to calibrate an extended analytical model of shear angle based on the Ernst–Merchant relationship.     

基于遗传运算法QSPR模型预测润滑剂在铜箔表面的润湿能力

采用静态悬滴法研究了润滑剂中脂肪酸、醇类和酯类添加剂在压延铜箔表面的接触角和润湿行为。利用半经验的量子化学方法计算了这些化合物的一些结构参数对其接触角进行了研究。利用遗传运算(GFA)统计分析方法，通过分子折射率和几种结构参数研究了其定量结构-性质关系。结果表明计算的量子参数可用于预测润滑剂在压延铜箔表面的接触角和润湿能力。这些润滑剂的接触角是其粘度、界面张力和物理化学参数的函数。其中起到主要作用的参数中，分子的折射率、分子的折射率、分子的弹性、总分子质量、溶剂表面积、元素计数、总能量和偶极子最关键。值得注意的是，润滑剂在压延铜箔表面的研究使润湿理论能精确到微观尺度，这为预测润滑剂在压延铜箔表面的润湿能力提供了新的见解。     

Difference angle quantization index modulation scheme for image watermarking

In this paper, we propose a new angle quantization index modulation (AQIM) method, called the difference AQIM (DAQIM) method. The proposed method aims to improve the watermarking performance against gain attacks. Unlike the original AQIM method (Ourique et al., Angle QIM: a novel watermark embedding scheme robust against amplitude scaling distortions, in: Proceedings of IEEE International Conference on Acoustics, Speech, and Signal Processing, vol. 2, 2005, pp. 797–800), the DAQIM method quantizes the difference of the two angles instead of the angles themselves. The main advantage of the DAQIM method is to disperse the interference to the watermark signal from one angle to more angles. Thus, the watermark has a higher ability to resist attacks. We perform a theoretical analysis of the document-to-watermark ratio (DWR) based on our proposed method. We show that our proposed method can obtain a lower embedding distortion compared to the AQIM and the gradient direction watermarking (GDWM) (Nezhadarya et al., IEEE Trans. Inf. Forensics Secur., 6(4), 2011, 1200–1213), methods under the same robustness and payload conditions. The experimental results demonstrate that our proposed method outperforms common existing methods in terms of the robustness against various attacks such as the JPEG quantization noise, additive white Gaussian noise (AWGN), cropping effect and mean filtering.     

海水淡化用空心锥喷嘴喷淋性能理论及实验研究

设计开发一种具有高通量、低流阻特征的空心锥喷嘴,并通过理论与实验方法研究空心锥喷嘴的喷淋性能,基于准自由涡理论建立空心锥喷嘴内部流体流动的数学模型,阐明流量系数、喷淋锥角、喷嘴流量与喷嘴结构参数之间的定量关系,并利用多效蒸馏海水淡化喷淋实验台对理论计算结果进行实验测试和验证。研究结果表明:正常工作状态下喷嘴流量系数、喷淋锥角、喷淋流量等参数理论值与测量值之间的误差小于5%,验证了设计模型的准确性。同时根据实验测试数据,拟合得到该类型空心锥喷嘴喷淋锥角与雷诺数之间的经验公式,可为蒸馏海水淡化用大流量空心锥喷嘴的结构设计、工艺选型提供理论指导和数据支持。     

High-resolution FIB-TEM-STEM structural characterization of grain boundaries in the high dielectric constant perovskite CaCu3Ti4O12

In this work, the grain boundaries composition of the polycrystalline CaCu₃Ti₄O₁₂ (CCTO) was investigated. A Focused Ion Beam (FIB)/lift-out technique was used to prepare site-specific thin samples of the grain boundaries interface of CCTO ceramics. Scanning transmission electron microscopy (STEM) coupled with energy dispersive X-ray spectrometry (EDXS) and Electron Energy Loss Spectroscopy (EELS) systems were used to characterize the composition and nanostructure of the grain and grain boundaries region. It is known that during conventional sintering, discontinuous grain growth occurs and a Cu-rich phase appears at grain boundaries. This Cu-rich phase may affect the final dielectric properties of CCTO but its structure and chemical composition remained unknown. For the first time, this high-resolution FIB-TEM-STEM study of CCTO interfacial region highlights the composition of the phases segregated at grain boundaries namely CuO, Cu₂O and the metastable phase Cu₃TiO_4.     

强化研磨加工中喷射角度对GCr15轴承钢板塑性变形的影响

利用ABAQUS有限元仿真软件研究不同喷射角度强化研磨加工GCr15轴承钢板过程的塑性变形,得到不同喷射角度与等效塑性应变沿真实路径距离的关系,并通过拉伸试验进行验证。喷射角度为90°的强化研磨加工伸长率为1.4%,相比未经过强化研磨加工的伸长率数值缩减了2.0%。断口收缩率由空白组的4.9%降低到喷射角为90°的2.2%。结合仿真和试验可知,强化研磨加工中喷射角度越大,塑性变形能力越低,材料加工越难。     

面向流屑角突变建模的切削状态参数经验公式的获得及应用

从提高流屑角突变模型的预测精度出发,建立了切削状态参数与3个切削控制参数之间关系的新经验公式。提出了一种通过迭代法准确设定有限元仿真软件刀-屑摩擦因数的方法,并通过直角切削Al6061-T6工件的有限元仿真试验,获得了一组不同切削控制参数组合条件下的切削状态参数数据。根据该数据拟合出剪切角φ、刀-屑摩擦角β、剪切应力τs关于刀具前角γ0、进给量f和切削速度v的经验公式,并通过一组直角切削试验,验证了所得经验公式的有效性。将新建经验公式应用于流屑角突变建模过程后,所得模型关于突变临界切削宽度的平均预测误差减小了27.2%。     

Effect of Reynolds number and boundary layer thickness on the performance of V-cone flowmeter using CFD

The effect of Reynolds number and boundary layer thickness on the performance of V-cone flowmeter has been evaluated using computational fluid dynamics (CFD). The shear stress transport k-ω (SST k-ω) turbulence model has been adopted for closure. The performance of two V-cone flowmeters with different beta ratios (β) viz., 0.6 and 0.7 for a fixed vertex angle (ϕ) of 60° has been analysed as a function of Reynolds number (Re). The results show that the coefficient of discharge (C_d) increases with Reynolds number in the laminar and transition flow regimes whereas it is nearly constant in turbulent flow regime. From the results, it can be concluded that C_d is independent of Re for values equal to 4000 and beyond. Further, it is also seen that the performance of the V-cone flowmeter is not affected by the upstream boundary layer thickness if the velocity profiles having different boundary layer thickness are extracted from an axial distance of 10D and more are fed at 5D upstream of the meter. However, the meter is sensitive to the extracted velocity profile from an axial distance of 5D and uniform velocity profile being fed at 5D upstream. The value of C_d may be sensitive as a result of the pressure variation due to the obstruction.